Nanoparsa, the phenomenon of moisture insulation company in Ahvaz

Introduction

Why are the Turks at the building levels a serious threat?

What is a double insulation and why is it the best option for repair?

Component A (Resin): This section, usually based on advanced polymers such as epoxy, polyurethane or polymer-nimble compounds, has the main task of adhesion, flexibility and chemical resistance.

Component B (Harder or Harder): Polymer becomes strong and impermeable.

This chemical reaction provides unique benefits for double insulation that distinguishes it from other materials:

Adhesion (Adhesion): A high -quality double insulation, molecular connection with the lower surface (concrete, cement, metal) and converts to an integral part of it. High mechanical strength: After complete drying, these materials have very high compressive and tensile strength and can withstand structural stresses. Flexibles: Many types of double insulation have elasticity and can tolerate the natural contraction and expansion of the structure without cracking. 2 % sealing: dense and seamless polymeric structure blocks any water penetration path. Excellent chemical resistance: These products are resistant to a range of chemicals, acids, bases and petroleum materials.

Step -by -Step Steps Use Double Insulation to Repair Cracks

Successful implementation of double insulation requires accuracy and adherence to technical principles. This process can be divided into five main steps:

Step One: Evaluation and Preparation of Level (Most Important Step)

The final quality of your work depends on this step up to 5 %. Any negligence in preparation will also make the best double insulation ineffective.

Complete cleansing: Crack and surrounding surface should be thoroughly removed from any dust, fat, oil, loose color, dandruff and particles. Using wired brush, water pressure (waterjet) and industrial fatty materials are recommended.

Open the Turks: To ensure complete penetration of double insulation into the depth of the crack, it must be opened. Using a mini -firm, create a V -shaped groove to a width and depth of at least one centimeter along the crack. This will increase the level of contact with the concrete and maximize the performance.

Final Cleaning: After creating the groove, completely remove the dust caused by the cutting pump or industrial vacuum cleaner.

The desired surface should be completely dry. Any moisture during execution can disrupt the chemical reaction of double insulation and cause adhesion to properly.

Step Two: Choosing the right double insulation (consult with specialists)

Not all Turks are the same and every Turkish needs its own product. At this point, consultation with a specialist team such as Nano Parsa experts is critical. When choosing a double insulation you should consider the following: Type of Turks: Is it static or moving (dynamic) and exposed to contraction and expansion? For removable cracks, a double insulation with high flexibility (elastomeric) should be used. Type of Level: The selective product must be fully compatible with surface (concrete, stone, metal). Environmental conditions: Is the surface exposed to direct sunlight (UV), chemicals or heavy traffic? User: Double insulation for pool repair is different from the right product for roof repair.

Nano Parsa Company helps you choose exactly the product engineered for your project by offering a wide range of specialized products, including a variety of epoxy and polyurethane double insulators.

Step Three: Careful Component (Perfection Chemistry)

This is the heart of the process. Always read the technical information sheet (TDS) provided by the manufacturer (such as nano -parsa).

Mechanization Ratio: Component A and B must be combined exactly with the relation that the factory specifies (usually based on weight). It is essential to use a digital scales. Reduced or increased the hardener of the product completely destroys the end properties of the product.

The correct mixing method: Pour the two components into a clean container and mix with a low rpm (about 1 to 2 rpm) for 1 to 2 minutes using an electric mixer (about 1 to 2 rpm). Hand or high -speed stiffness causes air into the mixture and reduces the final quality.

Pot Life (Pot Life): After mixing two components, the chemical reaction begins and you have a limited time to use double insulation called Pot Life or User Life. This time depends on ambient temperature (shorter in hot air). Always mix some of the ingredients that you can consume in this period of time.

Step Four: Run Insulation on Crack

apply the mixed double insulation into the V -shape you have prepared before using a spatula or trowel. Make sure the materials fill the entire cavity and no space left. Then smooth the surface with the surrounding surface. For very wide cracks or in places where there is high stress, a fiberglass lace layer can be used inside the material to arm it.

Step Five: Current and Practical Time (Patience is the Key to Success)

Once the implementation, double insulation requires time to complete its chemical reaction and reach its maximum hardness and resistance. This process, called kauring, depends on the temperature and humidity of the environment. During this time, the surface should be protected from rain, traffic and any mechanical pressure. The exact time of the curing is listed in the product Datashit. Hurry at this stage can waste all your hard work.

Why Trust to Nano Parsa to prepare double insulation?

Product selection is half the path of success. Nano Parsa, as a leading manufacturer and supplier in the field of modern building chemicals, is a clever choice for the preparation of double insulation: Unbiased Quality: The company's double insulation products are utilized using the best polymer resins and nano -formulated additives that guarantee unique adhesion, durability and performance. Free Technical Support and Consultation: Experienced Nano -Parsa experts before, and after shopping are with you to give you the best two -way insulation and provide guidance for perfect implementation. Diversity of Products: This company offers a complete basket of epoxy, polyurethane and cement-polymer insulation for various applications from structural repair to specialized sealing. Full Technical Documentation: All products are offered with technical information tab (TDS) and precise consumption guide so that no point is hidden from your view.

Conclusion: With double insulation, finish the cracks forever

Construction cracks are a serious problem that should not be treated with temporary and surface solutions. The use of double insulation is an engineering, permanent and reliable approach to repair and seal these deficiencies. You can ensure the health and durability of your structure for many years by following the steps of preparing, mixing and implementation, and most importantly, by selecting a quality double insulation and tailored to your project needs from a reputable source.